BGA Reballing Preform -Configurable 0.4mm pitch and below

(9 reviews) Write a Review
EZReball(TM) BGA Reballing Preform less than 0.4mm pitch
0.50 LBS
Calculated at Checkout
Placing the device on to the reballing preform

This is a unique BGA reballing preform for ultra fine pitch BGAs. It improves first pass yields and makes the reballing of devices fast and simple.

This BGA reballing preform for ultra fine pitch BGAs allows you to easily change alloys or reball devices after their removal.

BGA reballing stencils for very small devices come in a variety of alloys including but not limited to : tin-lead, lead free (SAC 305), high temp

More information on the testing of this device can be found here.

  • Minimum Aperture Size: .002in (.05mm)
  • Stencil Material: High temperature Polyimide with tacky, porous tape which cleans up with IPA.
  • Pitch: 0.40 - 0.15mm (6 mils)
  • Maximum Stencil Size: Approx 4 x 4in (100mm x 100mm)

We accept either standard GERBER files, part data sheets or CAD files.

If you need to order a preform 0.5mm or greater in pitch than order here.

This configurable part number for this reballing stencil means you do not have to sort through all of the patterns listed (there are many more).

The data you send us to make your part must have:

         # of solder balls

         Pattern of the solder array incl dimensions

         Overall package size

         Ball size

We will send you a checkplot/drawing of the device we will fabricate for you.

EZReball(TM) BGA reballing preforms for ultra fine pitch BGAs are packaged in groups of (15) in clam shell packaging.

Standard lead time is (3) business days for 2 packs.

Videos Hide Videos Show Videos

9 Reviews Hide Reviews Show Reviews

  • 5
    Great Product..Where have you been?

    Posted by William W on 12th Dec 2018

    Nice little product

  • 4
    Worked well

    Posted by Jason L on 2nd Nov 2018

    Parts when they get this small like ours are very hard to handle. We ended up fixturing the part to hold it during reballing

  • 5
    Nice Product

    Posted by Werner W on 15th Jun 2018

    Did not know it would be this simple to reball a 0.4mm pitch part

  • 4
    Worked well

    Posted by Sharwma C on 1st May 2018

    9 out of 10 worked flawlessly. That is frustrating when it takes a few minutes to align, prep the balls and pads and then one is missing after removal of the preform. I called the com[pany and they guided me through the rework of a single ball. Thanks.

  • 5
    Amazing Little Reballing Tool

    Posted by Hung F on 6th Dec 2017

    Had a very small 7 x 7 mm part and the preforms worked very well. My expert soldering tech got it done

  • 5
    Many Thanks

    Posted by Antonio G on 20th Sep 2017

    Good product. Simple.

  • 5
    Very Good

    Posted by Tsung Tsu on 15th Sep 2017

    Very tgood support

  • 5
    Nice Work

    Posted by Fredrick H on 12th Sep 2017

    Goth these perfect

  • 5
    Nice Product!

    Posted by Yusef G on 2nd Aug 2017

    This product got me out of a bind