Rework Stencil- StikNPeel (TM) -New Pattern

(22 reviews) Write a Review
StikNPeel(TM) Rework Stencil
Ships with 24-48 hours
0.50 LBS
Calculated at Checkout
Flexible plastic rework stencil aligned and ready to be printed

This unique rework stenciling system is very simple to use.

Adhesive Backed Stencil Thickness: 004in (.10mm), .005in (.13mm) and .006in (.15mm)
Minimum Aperture Size: .002in (.05mm)
Stencil Material: Plastic film with release liner. The adhesive backed stencil features a low tack sticky note type of adhesive.
MinimumPitch: .020in (0.5mm)
Maximum Area: Approx 4 x 4in (100mm x 100mm)

This unique method simplifies the rework process allowing the stencil get in to tight spaces, get higher first pass yields as the paste processing window is much wider than with metal stencils. These rework one-time-use stencils are ideal for connectors, QFPs, and other areas on the PCB requiring rework. These adhesive backed stencils may be designed with or without a solder paste boarder surrounding the area to be reworked.

We accept either standard GERBER files, part data sheets or CAD files.

Standard lead time is 24-48 hours after file approval.

These adhesive backed stencils are packaged in groups of (10) in a small antistatic bag.


Videos Hide Videos Show Videos

22 Reviews Hide Reviews Show Reviews

  • 4
    Simple to use

    Posted by Unknown on 4th Feb 2017

    I had a 0.5 mm pitch QFP and this was much easier than hand soldering

  • 5
    Nice product!

    Posted by Chris T on 24th Nov 2015

    After being frustrated with miniiature metal stencils I found thee. I will use these in the future.

  • 5
    Wish I would have found sooner

    Posted by Greg T on 22nd Jun 2015

    Why bother with metal stencils for rework anymore. This is a fast and easy way to go!

  • 5
    Simple to Use

    Posted by Jaylon G on 4th Apr 2015

    I was skeptical as I have been using metal stencils for many years with success. We had a part requiring rework that was sandwiched in between multiple components thereby not lending itself to metal stencils

  • 5
    Will not go back to a metal stencil

    Posted by Byron T on 7th Jun 2014

    Soooo much easier than the metals I have been fighting these many years

  • 4
    Easy to use product

    Posted by Kyle P on 16th Feb 2014

    Got check plot. Shipped out reasonably quickly

  • 5
    Great stuff!

    Posted by Bill V on 21st Dec 2013

    Tried this and will never go back to those #@$#$@#$@#$ little metal stencils

  • 4
    Simple to use product

    Posted by Joe R on 12th Dec 2013

    Stick it down, pull and push from the sides, print and rip off.

  • 4
    Nice simple product

    Posted by Joe R on 12th Nov 2013

    I was initially skeptical on this stenciling approach. However, after using it for a fine pitched part I am believer. It is now one and done where I was 80% on a good day with mini metal rework stencils.