IPC/WHMA-A-620E is the only industry-consensus standard for Requirements and Acceptance of Cable and Wire Harness Assemblies. IPC/WHMA-A-620E describes materials, methods, tests and acceptance criteria for producing crimped, mechanically secured and soldered interconnections and the related ass..

Price: $367.00

The IPC 7711/21D Standard provides procedures for rework, repair and modification of printed board assemblies. Included in this revision are the procedures previously released as change pages, an updated general information and common procedures section, new procedures for BGAs using focu..

Price: $485.00

IPC-A-610J is the most widely used electronics assembly acceptance standard in the electronics industry. IPC-A-610J standard includes a general update to the document, introduces several new surface mount component types and removes target conditions. Participants from 29 countries provided the..

Price: $367.00

IPC-J-STD-001HJ is recognized globally for its criteria on soldering processes and materials. Updated with participants from 27 countries providing input and expertise, the IPC-J-STD-001J standard brings the latest criteria to the industry including guidance on the use of x-ray to inspect throu..

Price: $303.00

]]>

]]> https://www.soldertools.net/ipc-j-std-001-revision-h-addendum-space-and-military-space-and-military-applications-hard-copy/ Thu, 16 Nov 2023 14:05:56 +0000 https://www.soldertools.net/ipc-j-std-001-revision-h-addendum-space-and-military-space-and-military-applications-hard-copy/

IPC J-STD-001HS space and military addendum, supplements or replaces specifically identified requirements of IPC J-STD-001H requirements for soldered electrical and electronic assemblies that must survive the vibration and thermal cyclic environments of getting to and operating in space a..

Price: $200.00

*This listing is for a USED copy of the IPC-A-610G Acceptability of Electronic Assemblies Standard. The standards are in very good condition and are not written on. There may be some imperf..

Price: $149.99

IPC/WHMA-A-620D is the only industry-consensus standard for Requirements and Acceptance of Cable and Wire Harness Assemblies. IPC/WHMA-A-620D describes materials, methods, tests and acceptance criteria for producing crimped, mechanically secured and soldered interconnections and the related ass..

Price: $260.00

The IPC-A-600K is the definitive illustrated guide to printed board acceptability! The IPC-A-600K is a four-color document providing photographs and illustrations of the target, acceptable and nonconforming conditions that are either internally or externally observable on bare printed boa..

Price: $334.00

IPC-J-STD-001H is recognized globally for its criteria on soldering processes and materials. Updated with participants from 27 countries providing input and expertise, the IPC-J-STD-001H standard brings the latest criteria to the industry including guidance on the use of x-ray to inspect throug..

Price: $277.00