StencilMask(TM) Solder Mask Repair Stencil

(1 review) Write a Review
StencilMask(TM) Solder Mask Repair Stencil
Ships with 5 business days
0.50 LBS
Calculated at Checkout
Mask underneath BGA damaged

file types are Dwg, dxf, GERBER

This is a unique mask repair stenciling system designing to make the repair of solder mask in large or repeatable areas much faster and more consistent. Simply peel back the stencil from the backing material, align it to the board and place in to position. Use liquid solder mask (UV curable in a small vial cab be purchased here) to pur some on to the stencil and using a micro squeegee roll the mask material in to the apertures of the stencil. Cure the mask and peel off the stencil thereby exposing the repaired solder mask in select areas.

Stencil Thickness: 0.014in (.045mm),
Minimum Aperture Size: .002in (.05mm)
Stencil Material: .Plastic film with release liner. Adhesive is a low tack sticky note type of adhesive.
MinimumPitch: .020in (0.5mm)
Maximum Area: Approx 4 x 4in (100mm x 100mm)

We accept either standard GERBER files, part data sheets or CAD files.

Standard lead time is 5 business after file approval.

StencilMask(TM) stencils are packaged in groups of (3) in a small antistatic bag.


Videos Hide Videos Show Videos

1 Review Hide Reviews Show Reviews

  • 5
    Major time saver

    Posted by Jason M on 3rd Oct 2013

    This was a real life saver as we had extensive mask damage on 3 very complex proto boards. I worked with Katy on the GERBER mods and the stencils made the repair process only 20 minutes per board as opposed to a minimum of 2 hours per board using the hand touch up method
    (dental pick and underneath the microscope with a steady hand)