Sometimes there are products that come along and you think to yourself-Wow! The StikNPeel™ rework stencil is one of those products. It simplifies the rework of site locations by placing a highly flexible, removable, adhesive-backed stencil on to a circuit board for localized solder paste, adhesive or flux printing.
Why Chose StikNPeel as Your Rework Stencil
The flexible nature of the film allows this rework stencil to e fit in to the dimensions of modern circuit boards. If the location is tight then we can design the stencil to be fit in to a tight location.
The adhesive on the backside of the rework stencil allows it to remain coplanar during the printing process. This coplanarity is assured by the adhesive. No solder paste will be smeared underneath the package. Complete the process one time. No “do overs” are necessary.
The temporary nature of this adhesive system allows you to make ultara fine adjustments of the rework stencil location. By simply pushing on the stencil small incremental alignments can be made to its location.
The rework stencils are single use so no extra time is required in cleaning off the stencils. Metal stencils can have clogged apertures which means that there will not be a 100% release of the solder paste resulting in starting over again on the rework process.
Safe to Use
These rework stencils have been shown not to leave any harmful residues (See "A" panel results attached) behind that are detrimental to the long term reiliability of the assembly.
Tens of thousands of StikNPeel™ rework stencils have been fabricated for customer use. They are a better way to rework small locations on a PCB requiring a controlled depost. See the study results comparing the performance of StikNPeel(TM) stencils to traditional mini metal stencils.
StikNPeel™ rework stencils are packaged in packs of (10) pieces. They are deliverd in 24 hours after checkplot approval.