Circuit Frame for BGA Pad Repair-Epoxy Method
The base metal is 1 oz copper with chemical etchant which results in a high bond strength to the PCB. The coating on the PCB side is an immersion bright tin coating.
It has a 6 month minimum shelf life and is date-coded on the circuit frame.
Specifications
Frame Size: 57 x 38 mm (2.25" x 1.50")
Material: Copper foil 0.036 mm (0.0014")-backside micro-etched for enhanced adhesion Adhesive
Backing: Phenolic film adhesive 0.0254 mm (0.001") thick.
Electrical Resistivity: Greater than 1014 ohm-cm
Dieletric Strength : 750 Volts/mil
Glass Transition Temperature: -60 C
Device push off strength: Greater than 2,000psi, or 13.8N/mm2
Peel Strength: Greater than 9lbs/in (1.61 kg/cm) post cure to FR-4
Hardness: 65 Type A
Cured density: 1.2 gm/cc
Thermal Conductivity: 1.2 BUT-in/hr-ft2-F
Linear Thermal Expansion: 110 ppm/C Max Continuous
Oper Temp: 150C
Bonding Time: 15 seconds Bonding Temperature: 200C
RoHS compliance: YES
Custom designs available in 5-10 business from BEST. No minimum order. Call 847-797-9250 for details.
Tin plated. To be used with PCB epoxy resin system. Can be used for both tin/lead and RoHS compliant repairs.