IPC-A-610H is the most widely used electronics assembly acceptance standard in the electronics industry. IPC-A-610H standard includes a general update to the document, introduces several new surface mount component types and removes target conditions...

IPC-A-610H is the most widely used electronics assembly acceptance standard in the electronics industry. IPC-A-610H standard includes a general update to the document, introduces several new surface mount component types and removes target conditions...

IPC-J-STD-001H is recognized globally for its criteria on soldering processes and materials. Updated with participants from 27 countries providing input and expertise, the IPC-J-STD-001H standard brings the latest criteria to the industry including...

The IPC-A-600K is the definitive illustrated guide to printed board acceptability! The IPC-A-600K is a four-color document providing photographs and illustrations of the target, acceptable and nonconforming conditions that are either internally or...

Miniature SMT Rework Stencils are laser cut solder paste stencils designed to replicate the initial manufacturing process albeit for a designated component or select area. These laser cut mini stencils can either have flaps (to prevent neighboring areas...

Component Printing Templates Based on its long work on BGA rework and repair process and its in-house capability to produce metal stencils BEST can provide for you a timely, cost-effective solution for printing on to components for ERSA rework systems...

SMT Framed Stencils are laser cut solder paste stencils designed to work on SMT printing machines. We stock a wide variety of frames for many different printing machines. These laser cut stencils are permanently glued into a frame. These framed stencils...

SMT Foil Stencils  or in some circles called frameless stencils are laser cut solder paste stencils designed to work on their own for hand printing or with stencil tensioning systems. These laser cut stencils do not need to be permanently glued in a...

IPC J-STD-001HS space and military addendum, supplements or replaces specifically identified requirements of IPC J-STD-001H requirements for soldered electrical and electronic assemblies that must survive the vibration and thermal cyclic environments of...

When you are in a hurry for your soldering kits BEST can provide expedited stock pulling and delivery services. This will get the item shipped in 24-48 business hours (ie during the working week) based on 7AM-3:30PM CST. This  service will get the...

*This listing is for a USED copy of the IPC/WHMA-A-620C Acceptability of Electronic Assemblies Standard. The standards are in good/fair condition and are not written on. There may be some imperfections on the front or back covers due to normal...

BEST Inc. laser machines custom polyimide washers for a variety of industrial applications requiring the used of high performance films. The washers, which can be a few dozen to tens of thousands, provide the precision and stability in the end use...

BEST Inc. provides custom polyimide shims and gaskets made from high temperature rated, electrically insulating, corrosion resistance, strong, wear resistant films. These shims fit a variety of applications in which there needs to be a heat barrier...

IPC/WHMA-A-620D is the only industry-consensus standard for Requirements and Acceptance of Cable and Wire Harness Assemblies. IPC/WHMA-A-620D describes materials, methods, tests and acceptance criteria for producing crimped, mechanically secured and...

IPC/WHMA-A-620D is the only industry-consensus standard for Requirements and Acceptance of Cable and Wire Harness Assemblies. IPC/WHMA-A-620D describes materials, methods, tests and acceptance criteria for producing crimped, mechanically secured and...

IPC-J-STD-001H is recognized globally for its criteria on soldering processes and materials. Updated with participants from 27 countries providing input and expertise, the IPC-J-STD-001H standard brings the latest criteria to the industry including...

The BEST Wires and Terminals Training Kit contains all of the materials you may need for Certification and Recertification. The components included in the kit are: (1) Foot of 20 gauge wire(1) Foot of 22 gauge wire(4) Turret Terminals(4) Gold Solder...

If you already have an existing part number and want to re-order and existing pattern tyou have come to the right place. T The StencilMate(TM) rework stencils assists in making the rework of QFNs, LGAs and other bottom terminated components (BTCs)...